The IMfT Library - General Publications
Publications by the BCFG/IMfT
International Cold Forging Group (ICFG) Publications
ICFG "40 Years History Document" Doc. 18/07, pub Meisenbach Verlag Bamberg, 2007.
Other Publications in the IMfT Library
COLD EXTRUSION OF CARBON STEELS, Effects of Tool Geometry on Backward Extrusion, PERA Report No. 102.
THE COLD FORGING OF STEEL, A report prepared by a sub group of the International Cold Forging Group.
Extracts from CHIPLESS MACHINING, Chapters 9 - 15.
DETERMINATION OF EXTRUSION PRESSURE, Cold Forging Data Sheet No. 69002, prepared and issued by the Cold Forging Group of the Institute of Sheet Metal Engineering (ISME), Metal Forming, May 1969.
DIES (DIE ASSEMBLIES) FOR COLD EXTRUSION OF STEEL, ICFG Data Sheet No. 6 72, Metallurgia and Metalforming, May 1972.
IMPACT (COLD) EXTRUSION OF STEEL, Preliminary Investigation, PERA Report.
TOOL STEEL PUNCHES FOR COLD BACKWARD EXTRUSION OF STEEL, Cold Forging Data Sheet No. 68001, prepared and issued by the Cold Forging Group of the Institute of Sheet Metal Engineering (ISME), Metal Forming, December 1968.
B. N. Cole et al: HIGH SPEED IMPACT OF EXTRUSION OF METALS, Applied Mechanics Group, Proc Instn Mech Engrs 1965-66, Vol 180 Pt1 No 8.
K. W. Hards: COLD FORGING IN WEST GERMANY, Metalworking Production, 7 March 1962.
B. Kaul: COLD EXTRUSION OF STEEL, Machinery, Vol 91, 25 October 1957.
T. E. Lloyd & E. S. Kopecki: COLD EXTRUSION OF STEEL, Iron Age, 4 August 1949.
T. F. Massey: THE RELATIVE MERITS OF PRESSES FOR THE COLD EXTRUSION OF STEEL, Sheet and Strip Metal Users' Technical Association, Special Conference on Cold Extrusion of Steel, at the Royal Empire Society, London.
J. McKenzie: DESIGN CHARTS TO DETERMINE PRESS LOADS FOR THE COLD EXTRUSION OF STEEL, National Engineering Laboratory Report No. 118, October 1963.
M. D. Verson: IMPACT MACHINING, Verson Allsteel Press Company, 1969.
D.V. Wilson: METALLURGICAL REQUIREMENTS OF STEELS FOR COLD EXTRUSION, Sheet and Strip Metal Users' Technical Association, Special Conference on Cold Extrusion of Steel, at the Royal Empire Society, London.
D. Yun, L. Xiaoping and X. Hongshen: DEEP CRYOGENIC TREATMENT OF HIGH-SPEED STEEL AND ITS MECHANISM, Heat Treatment of Metals, Vol 3, 1983.
The above papers were donated by David Clough, Federal Mogul - Bradford.
METAL FORMING HANDBOOK, Schuler GmbH, Springer-Verlag Berlin Heidelberg 1998 (Book and CD Rom).
IMPRESSION, Journal for the Planning and Operation of Hydraulic Presses, Published by Schuler SMG GmbH & Co. KG.
INFORM, The Magazine for Metalforming, January 2000 Published by Schuler SMG GmbH & Co. KG.
The above publications were kindly donated to the library by Schuler SMG GmbH & Co. KG, Louis-Schuler-Strasse 1, D-68753 Waghausel, Germany, Tel: ++49 72 54 988-0, Fax: ++49 72 54 988-214, Email: firstname.lastname@example.org, www.schuler-smg.de.
J. A. Schey: METAL DEFORMATION PROCESSES, Friction and Lubrication, Marcel Dekker Inc., New York, 1970.
Donated by John Yarnall, Bodycote Ltd., Treasurer of IMfT
SELECTING THE RIGHT MECHANICAL OR HYDRAULIC PRESS FOR THE JOB, GW Bliss, Catalog 950.
COMPUTATIONS FOR METAL WORKING IN PRESSES, GW Bliss Catalog 960.
Donated by Steve Walkinshaw, Aida S.r.l. UK, Chairman of IMfT.
ADVANCED TECHNOLOGY OF PLASTICITY
Proceedings of the 6th ICTP, Sept 1999, Edited by M. Geiger